What precautions should be taken when cleaning titanium heat exchangers?

1. Safety protection: Operators should wear protective equipment, such as protective glasses, gloves, work clothes, etc., to prevent cleaning agents from causing harm to the body.
2. Cleaning agent selection: Be sure to use cleaning agents that are non-corrosive or extremely corrosive to titanium materials to avoid damage to the heat exchanger due to improper cleaning agents.
3. Concentration control: Strictly match the cleaning agent according to the prescribed concentration ratio. Too high a concentration may damage the titanium heat exchanger, and too low a concentration may affect the cleaning effect.
4. Temperature control: Control the temperature of the cleaning liquid within an appropriate range to avoid excessively high or low temperatures affecting the cleaning effect and the performance of titanium.
5. Pressure monitoring: During the cycle cleaning process, pay attention to monitoring the pressure to prevent excessive pressure from causing leakage or damage to the heat exchanger.
6. Cleaning time: Control the cleaning time well. It should not be too long or too short. Too long may cause damage to the titanium surface, and too short will not effectively remove scale.
7. Internal inspection: Before and after cleaning, the inside of the heat exchanger should be carefully inspected to evaluate the dirt situation and cleaning effect, as well as whether there is damage.
8. Environmental protection: Rationally handle the wastewater and waste generated by cleaning to avoid pollution to the environment.
9. Follow the specifications: Strictly follow the specifications and procedures of the cleaning operation and do not change them at will.
10. Record archiving: Keep detailed records of various parameters and operations during the cleaning process for subsequent inquiries and references.