Introduction to the polishing process of titanium reactor

1. Polishing can roughen the surface of the bottom tire, and then increase the surface energy and specific surface area, and increase the tightness of the bottom tire metal and the bottom glaze.
2. Polishing is generally carried out on a grinder or with a portable grinding wheel. The requirements are to round sharp edges and corners, smooth the welding slope on the glass lined surface, remove oxide skin and skin clip, and then show the original color of the product.
3. If there are surface inclusions, oxide layers, weld problems on the metal surface and adhered grease and dirt during machining, the enamel quality of titanium reaction kettle will be affected, so we must polish it.
4. Sometimes, if the carbon content exceeds the standard, the method of high temperature surface polishing shall be adopted for compensation.
If the polishing process is used properly, we should do a good job in the maintenance of titanium reactor. The polishing process can be used for the treatment of its surface, which is very close to the polishing operation.