Positive displacement heat exchanger is a common heat exchange equipment, which plays a full role in many factories and other use environments. The equipment not only has high heat exchange efficiency, but also can better adapt to a variety of working environments. Because it has many characteristics, it is loved by all walks of life. However, if you want this device to work better, you need to pay attention to some aspects in the use process, mainly the following aspects.
Do a good job in daily maintenance
No matter what kind of equipment, if you want it to have a longer service life, you need to maintain the equipment regularly. One thing to note is the total hardness of hot water. When its hardness exceeds the specified value, it needs to be stabilized by softened water to avoid excessive hardness of the hot water bucket, which will not only affect daily use, but also have a certain impact on the society. At the same time, the pipeline and outer wall shall be cleaned regularly to avoid scaling and affect the use efficiency.
Good temperature control
In order to achieve better heat exchange effect, some people will deliberately raise the temperature when opening. However, according to the requirements of the equipment, this practice is not safe. We should not only use reliable houses, but also choose switches with high control sensitivity. In any state, the difference between the set temperatures shall not be greater than or less than 5 ℃, otherwise the equipment may be affected. In addition, the maximum temperature of the equipment shall not exceed 75 ℃, otherwise it may accelerate scaling and affect the specific work efficiency. This also tells you that when using positive displacement heat exchanger, it is very important to do a good job in temperature control.
Use according to safety technical standards
Positive displacement heat exchanger is a medium-sized equipment. If it cannot be used according to normal operation, equipment failure and even some safety problems may occur. This also tells us that we can't ignore the security issue at any time. For example, the installation of safety valves shall be purchased in strict accordance with the required products and installed in accordance with the corresponding standards. If this cannot be done, the expansion tank can be connected to the heat exchanger and the equipment can be inspected regularly, so as to eliminate the potential safety hazards of equipment use in time.
To sum up, if you want to get a better sense of satisfaction in the positive displacement heat exchanger equipment, you need to first consider these aspects that need attention, so as to make the equipment use more smoothly. Sometimes more suitable heater equipment will be selected to meet more needs. This is obviously a very meaningful method, which allows everyone to have a clear direction in the selection process.
